MBF Motorcycle Forums banner
1 - 5 of 5 Posts

·
Registered
Joined
·
211 Posts
Discussion Starter · #1 ·
Tonight I decided to do the Stage 1 fender chop. Did anyone else do anything with the gapping hole left behind when you cut out the license plate light?

I cut a piece of diamond plate to fit into it and used epoxy to hold it in place and seal it up to keep junk from flying though the hole and sitting on the plate bracket and on the back of the license plate.

I will post a picture if any one needs a visual. Just let me know.

Edit: here are the pix. I will leave them in link form to not waste space on the forum memory size.
http://i73.photobucket.com/albums/i219/lunchbox194/DSCN2921.jpg

http://i73.photobucket.com/albums/i219/lunchbox194/DSCN2922.jpg

http://i73.photobucket.com/albums/i219/lunchbox194/DSCN2924.jpg
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top