MBF Motorcycle Forums banner

My rf1

173 Views 1 Reply 2 Participants Last post by  Tinsnips
Hi was looking for sthe ome info on my trike it is not allowing me to put it in to gear and is grinding but while turned off goes through the gears smoothly also the clutch lever is soft even after bleeding anyhelp or suggestions would be gratefully accepted. Regards mike
1 - 2 of 2 Posts
If it is a hydraulic clutch I would say you need to bleed it. A soft clutch is almost always air. Get a vacuum tool to help bleed it.
1 - 2 of 2 Posts