Just gotta make sure you measure the forks correctly. You'll also have to use a load equalizer and/or the Eclipze module (it's cheap) to make sure you maintain the running lights and the stock blink rate.
I changed out my stock blinkers to Mini Bullet LED Front and Back (LED lights by J&P part no.5200535 and 5200536) these lights are 1/3 the size of stock and much brighter. It takes a little time because you dealing with wires. Not to bad for the front but rerouting in the back you have to make sure you run them high along the inside of the rear fender to stop wire dragging.