Problem: turn the ignition on and I can start the bike, use the turn signals, and horn. High and low beam do not work
I've had them working in short bursts but an hour or two later they stop working again
Set up: main headlight with dual filament bulb, aftermarket side lights (think road king) with sealed 30w 12.4v lights.
Work done so far: confirmed continue and voltage at the lights multiple times; swapped fuses; disassembled, cleaned, and reassembled starter and light switches; replaced burned out side sealed light.
I'm starting to lose it a little and can't think of anything else to clean/replace????

I didn't find the right solution from the internet.


teaser trailer