Heat shields for stock exhaust?

Results 1 to 3 of 3

Thread: Heat shields for stock exhaust?

  1. #1
    Member
    Join Date
    May 2012
    Location
    Illinois
    Posts
    2

    Default Heat shields for stock exhaust?

    The stock exhaust is about 4 inches in diameter, each pipe. I have trouble finding heat shields for the rear, passenger area. The universal cobra heat shields come 2 1/4 diameter maximum. Is there anything out there? thanx

  2. Remove Advertisements
    MyBikeForums.com
    Advertisements
     

  3. #2
    Senior Member
    Join Date
    Jun 2012
    Location
    outback Ky
    Posts
    112

    Default

    I don't think their are any, Speaking for myself I really see no need The peg has a heel guard and foot or leg should not be in area of the pipes . I have people mount and dismount from L/side you could make your self a couple and have chromed I guess .

  4. #3
    Veteran Member distantThunder's Avatar
    Join Date
    May 2008
    Location
    So California
    Posts
    1,154

    Default

    heatshield instructions ...

    1. start the engine of your Raider
    2. turn your head backwards towards the passenger's face
    3. Yell the following ... "DON'T put your leg on the pipes - they'll burn you through your jeans !!!"

    I've found that these words of advice seem to work pretty well :-)
    As said above .... the passenger pegs do keep their legs above the pipes.
    If it still bothers you, maybe install floorboards for the passenger.

    cheers,
    dT

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •