Pcs slam kit

Results 1 to 2 of 2

Thread: Pcs slam kit

  1. #1

    Default Pcs slam kit

    Hi guys. I had installed apps lowering kit a while back. Bike was bottoming out once in awhile when solo.
    Have just installed the progressive spring, bottoms out.. Will adjusting the shock setting fix? If so which way do I turn?
    Thanks




    I

  2. Remove Advertisements
    MyBikeForums.com
    Advertisements
     

  3. #2
    Senior Member mddrummer911's Avatar
    Join Date
    Oct 2010
    Location
    Jonesboro, Arkansas
    Posts
    371

    Default

    • Quote Originally Posted by 7.62x39 View Post
      Hi guys. I had installed apps lowering kit a while back. Bike was bottoming out once in awhile when solo.
    Quote Originally Posted by 7.62x39 View Post
    Have just installed the progressive spring, bottoms out.. Will adjusting the shock setting fix? If so which way do I turn?
    Thanks



    Ok first the progressive spring is shorter than the stock spring so if you set the adjusters at the same spot then You will be lower. Next yes tightening the preload on the spring will raise the bike however it will stiffen the ride quality. With anything righty tightey lefty loosey. I have the pcs lowering bones and progressive spring and don't have any problem bottoming out even 2up. If you have a mc jack to lift your bike, you can adjust the preload on the bike and won't have to take it all apart again.

    I
    Michael p davis
    Michael.Phillip.Davis@gmail.com

    240 club, PCS lowering bones, progressive spring front and rear, integrated tail light, customdynamics front turn signals, la choppers bars, mortons pipes, webslinger dash, Patric Racing air intake kit, cobra fuel processor, bomber midnight engine cover kit, 3" forward controls, "dejablu savage" custom front fender

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •