V-Star axle torque specs
Results 1 to 2 of 2

Thread: V-Star axle torque specs

  1. #1

    Default V-Star axle torque specs

    Anyone know what the torque specs are for the front and rear axle nuts? Can't find the info anywhere!

  2. Remove Advertisements
    MyBikeForums.com
    Advertisements
     

  3. #2
    Member
    Join Date
    Jun 2009
    Location
    Ulster Park NY
    Posts
    2

    Default

    From the Service manual for the V Star 950

    TIGHTENING TORQUES

    Item Thread size Qty Tightening torque size

    Front wheel axle M16 1 59 Nm (5.9 mkgf, 43 ftlbf)
    Front wheel axle pinch bolt M8 2 20 Nm (2.0 mkg, 14 ftlb)
    Front brake caliper bracket bolt M10 2 40 Nm (4.0 mkgf, 29 ftlbf)
    Front brake caliper retaining bolt M10 2 27 Nm (2.7 mkgf, 19 ftlbf)
    Front brake disc bolt M8 6 23 Nm (2.3 mkgf, 17 ftlbf)
    Bleed screw (front brake caliper) M7 1 6 Nm (0.6 mkgf, 4.3 ftlbf)
    Rear wheel axle nut M18 1 150 Nm (15 mkgf, 110 ftlbf)
    Rear brake caliper retaining bolt M10 2 27 Nm (2.7 mkgf, 19 ftlbf)
    Rear brake disk bolt M8 6 23 Nm (2.3 mkgf, 17 ftlbf)
    Bleed screw (rear brake caliper) M7 1 6 Nm (0.6 mkgf, 4.3 ftlbf)
    Rear wheel pulley bolt M6 5 11 Nm (1.1 mkgf, 8.0 ftlbf)
    Rear wheel pulley self-locking nut M12 5 95 Nm (9.5 mkgf, 68 ftlbf)
    Rear wheel drive hub stud bolt M12 5 30 Nm (3.0 mkgf, 22 ftlbf)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •