- Raider Exhaust
- Accessories
- Important Part Number
- License plate relocation, rear fender mod
- Engine/Valve noise
- Vance & Hines Pipes
- ERROR code 37
- Cobra Exhaust on my Raider
- Oil Change on your Raider
- Warranty
- Hard Krome pipes
- Foot pegs
- Lowering kit
- Throttle lock install.
- Accessory wiring?
- What's up with the Fit of the Kuryakyn ISO Flame Grips?
- Side Mount Plate
- exhaust ?
- What Fuel Processor is better for the Raider?
- transfer case oil?
- Mods poll
- Chock
- UPDATE - Information re: Fuel Controller Modules
- Punching out the stock exhaust
- gas tank removal?
- Looking for turn signal P-clamps for the Monster 46mm Raider Front Fork Tube
- bak
- exhaust system
- Thinking about taking off the Rear Disc Brake Cover?
- The Kuryakyn ISO Flame Grips Fit and Look great on the Raider>
- What about that rear tire?
- warning!!!
- changing exhaust
- SAMSON exhaust
- Belt Guards
- Integrated Tail Light
- exhaust and fuel managment
- After market exhaust
- Question about Arlen Ness Grips for the Raider
- Breaking the mill in and the expressway... thoughts?
- yamaha raider transfer case oil made easy
- aftermarket exhaust
- Big Radius or Swepts?
- Forward control 3" kit
- Another integrated tail option ... Custom LED
- 240 rear tire
- Customizing My Raider Photos Part 1.
- Raider exhaust mod from YouTube.
- Dual Touring seat
- Stage 2 Fender Chop - integrated tail light, etc...
- raider transfer case oil made easy
- power commander
- 240 Rear wheel for the Raider.
- New Fenders
- New Bike Extended Warranty
- Exhaust, Air Filter and Fuel Control
- Clunky Transmission
- ignition lock reloction
- Small problem with the Raider
- New Windshield
- Stock Exhaust Removal.
- Woohoo! New parts!
- Slip-on exhaust
- Has anyone removed the Fuel Tank yet?
- New grips
- Need a PC III ?
- Seat Options Your thoughts!!
- Speedometer accuracy
- Rear Fender
- Alarm/Pager
- Controls and Switch Moves For New Grips?
- HEADLIGHT BULB H4???
- Warranty Question
- Front Blinkers
- Upper and Lower belt guard
- allen wrench size
- Aux. Power
- gremlin bell
- question about stage 1 fender chop
- Cobra Swepts Installed - short video
- Morton's vs Tejas for their exhaust
- fi2000r
- New shift linkage
- any tips/advice before my Rider's Edge?
- COBRA SWEPTS - BAFFLES OR NO BAFFLES
- Windshields
- Has anyone Removed their Rear Disc Plate off yet?
- Opinions - possible exhaust
- 1st service questions
- K&N+drilled airbox+Cobra swepts+stock ecu
- Speedo problems
- Intergrated taillights and turn signals
- vance and hins
- Anyone polish their stock wheels?
- Found some grips that the black Raider-ers might be interested in.
- Replacing pipes as i type this HELP! what do i do with the EXUP valve..
- Oil Check video
- im having a problem
- WTB "S" chrome side covers
- Corba Slashdown exhaust + my other mods
- high performance cams
- Service Manual
- Front Fender for the Raider?
- Could there be a prob?
- Raider needs a Tachometer....what do you guys think?
- Ceramic or High temp Powder coating heat shields Help
- Auxillary Switch on Throttle Side
- Jack from Idaho's Solo Raider S Exhaust question
- Any suggestions?
- Windshield
- HID HEADLIGHT in BLACK RAIDER
- Punching out the Uglies
- WARNING "Power Commander" Does not offer upgraded Maps! on-line
- Ist Service (600 Miles)
- Front Turn Signals
- Fi 2000 o2
- Advice- 240 Rear Tire
- MORTONS AIR FILTER KIT
- Custom Dynamics LED license plate frame SUCKs
- Performance Edge
- chrome stripes on the sides of the gas tank
- No Manual new raider
- Raider Clean Up (Removing those ugly sheilds on the side to show off the motor)
- backfire
- Parts being installed today!
- Anyone ever use a Phantom Pad?? Reviews Welcome!!
- Passengers with the lowering kit
- Morton Exhaust Problems - Resolved?
- Cobra swepts will scrape
- Swepts, K&N and Fi2000R O2 - How To Completed!
- setting the speedo
- Installing new grips
- Belt Guards
- FUEL GAUGE
- Gear Oil for the Transfer case??
- My Dream Pipes
- Custom Mirrors
- Maintenance and Mods Page
- Drilling the factory pipes
- Hard Krome's Side Burner pipe
- Passenger seat is now quick release!!
- Porcelain Brake Pads
- Handlebar Helmet locks
- Corbin seat
- Frame paint?
- K & N Filter options
- Performance Edge...hope parts are better than customer service
- Keeping the ignition switch to RUN and just using the key?
- 240 Metseler Tire! Spoke to them today!
- New Deal on Cobra Swept
- palhegyi exhaust
- GHOST BRACKETS
- Yamaha Warranties and Service Manuals
- Passenger Foot Pegs
- Traffic light Signal trippers.
- Intake back fires
- transmission noise
- Custom Exhaust
- Cable with tool kit??
- Saddle Bags Installed
- efi raider gurus----tuneboy?
- Raider runs rough
- What Fuel you running in your Raider
- Levers and kickstands on to the chromer
- My new and improved Raider
- first oil change
- Braided Brake Lines Installed + Easy Fork Protector Removal
- new Bars
- Rear Billet Fender Rack from Yamaha??
- COBRA DRAGSTERS any body have them??
- Extreme Customization?
- Front Fender mod Started
- Need some real help here.
- How does the cobra swept exhaust sound
- remapping
- HALGREENLEE, Did the 8.5" wheel x 240 tire fit stock swingarm
- Just got my Yamaha windshield
- MORTONS shift linkage customized
- Trailer modification
- Installing new grips
- Hole cover bib
- Fender Seat Bracket/Holes
- Custom foot pegs (not kury)
- Lowering the rear end
- Curb parking and the factory exhaust
- New pipes
- Some pics of my tall Yamaha windshield. (and my theft deterent system)
- actionelectric
- Tach, temp. gauge ? + Misc,
- NEWor USED REAR WHEEL WANTED
- What is the cost for 1st Maintenance (600 Miles check up)
- Tank chrome
- Blacked out belt guard
- Ack! I just found a couple of oil spots under the bike!
- OEM vs Aftermarket Accessories
- Sprocket, Driven (66 ???
- Question on removing that shield thing on the rear rotor.
- Raider Accessories
- Bike Cleaning - possibly a stupid question
- Morton Exhaust
- air ride
- Roadburner Velocity on Our Raider
- memphis shades
- VTX 1800C handlebars
- Installed Fi200R---still popping
- Installing grips for dummies
- Finally got the quick release backrest base
- Update: She's BACK from the Dyno!
- Raider Service Manual
- JP Vance and Hines 2 into 2 Big Radius
- Yamaha OEM Engine Guards
- Louder pipes
- lube change
- Morton's pipes
- dyno numbers
- DG Hard Krome pipes
- new efi wizard joins!!
- Polishing your wheels
- CHROME BELT GUARDS
- loose tank
- Flaming Hand controls
- Accessory Plug
- Buck's Lowers for Raider
- Whining/squealing noise
- One major problem
- New grips for my Raider
- Good read on belt drives
- Chrome ignition cover?
- looking for accesories
- Fuel Tank Removal
- Crossed Coil Wires?????
- Exhaust Drilling
- Saddle bag supports??
- Rear tire removal.
- CHROME RIMS
- Anybody else with this problem - stalling
- Headlight Rattle
- FAQ and How-to
- Need Help Finding Fuel Processor
- pegs for the engine guard
- big radius 2into1
- a strange sound
- Really cheap bling
- Punta Cana Vacation
- Two Questions….. Governor – Reflectors
- License Plate
- sorry i asked about vance and hines 2into 1
- Neck wires
- Engine Guard Install Question
- Windshields for Raiders